09-27-2025, 07:38 AM
Do some areas in the house have weak Wi-Fi? Proper Hyzom extender setup takes care of this quickly. The Hyzom WiFi extender operates in two major working modes- Repeater Mode and Access Point Mode, and each is used for slightly varying applications.
In Repeater Mode: The extender has to be installed halfway between the router and the dead zone where Wi-Fi is not available or is weak. Connect to the extender's network and now open any browser and key in 192.168.188.1. Sign in and select the main Wi-Fi network to enter its password. The extender rebroadcasts the signal it is relayed to in this mode.
For AP Mode: Connect the extender to the router via Ethernet. Again, step into the web interface and follow the same configure steps. This creates a different Wi-Fi from the wire downhill.
Whether it is to extend coverage upstairs or to set a new access point, a Hyzom extender setup will make your internet go faster and become more reliable in each and every nook and corner.
In Repeater Mode: The extender has to be installed halfway between the router and the dead zone where Wi-Fi is not available or is weak. Connect to the extender's network and now open any browser and key in 192.168.188.1. Sign in and select the main Wi-Fi network to enter its password. The extender rebroadcasts the signal it is relayed to in this mode.
For AP Mode: Connect the extender to the router via Ethernet. Again, step into the web interface and follow the same configure steps. This creates a different Wi-Fi from the wire downhill.
Whether it is to extend coverage upstairs or to set a new access point, a Hyzom extender setup will make your internet go faster and become more reliable in each and every nook and corner.